For the Motobecane Moped Muffler sealing and rattleing problem there is an
original equipment copper crush ring gasket that is only good for one use. I
would recommend putting two brand new copper crush rings in, cleaning all the
threads and then torque down the exhaust nut and this will crush the gaskets
to form a tight fit. There is an external locking clip available for the
exhaust on Motobecane Mopeds. I have all the original equipment parts in
stock if you cannot find them locally.
For the Puch Magnum rear sprocket for Mag Wheels the following can be
observed. The smallest sprocket that can fit on a Puch Spoke rear wheel hub
is 36t and there is almost no space left between the sprocket bolt holes and
the sprocket. You could not fit a smaller sprocket on this hub. Now the hub
for the mag wheel is slightly larger in diameter and the smallest 4 bolt
style Magnum Mag wheel sprocket is 38 to 40 teeth. We have all the sprockets
mentioned in stock.
As for Tires we have Knobby tread, Regular tread and semi slick treads in
many brands and sizes. We are always glad to answer questions and help.
Steve's Moped & Bicycle World Inc.
40 Park Avenue Dumont NJ 07628
Main Mega Store: ph(201)384-7777 fAX(201)384-7831
Dumont Store Hours: Mon. and Fri. 10:30am-7pm Tues. & Thurs. Till 8pm
Wed. till 5pm Sat. 9:30 to 5pm E-MAIL MOPEDMOPED@AOL.COM
WEB ADDRESS WWW: STEVESMOPED.COM