Hi, sounds you need a bigger manifold. or make an adaptor, ask for someone who could cut the right shape out of a piece of steel/ alu pipe. or find a steel/copper pipe with the right diam and dimensions, 100/1000" ~ 2.5mm 2 ->1.5mmX diam approx 18mm is available i think. peter ----- Oorspronkelijk bericht ----- Van: Aan: Verzonden: maandag 3 juli 2000 23:01 Onderwerp: Re: shimming stock for carb > the intake manifold is about 100 thousands smaller than carb mount hole, > cut up an aluminum can but its still pretty sloppy... > list.
|