I am considering buying a moped mainly as transportation across town. Do you know of any good recommendations of what to get for the money. Gregory White ICQ address: 3377720 web page address: http://www.geocities.com/colosseum/1004/ aol nick:gwhite00 yahoo nick: gregwhite MEMPHIS WRESTLING IS BACK Starting Saturday, Jan 29, Memphis Wrestling will be back! Every Saturday morning at 11:00 on UPN channel 30 in Memphis you will see a wrestling show that will once again put Memphis Wrestling back on the map! It will also be airing at the same time on UPN in Jackson, Nashville, and Birmingham Watch MPPW every saturday on WMC-TV 5 at 11:00am........ yahoo nick: gregwhite ----- Original Message ----- From: "Kiroja" To: Sent: Saturday, March 04, 2000 1:43 PM Subject: Re: Reassemble > > Hello all,I'm ready to start putting my Puch MS50 back together,I > > replaced the rings and I'm ready to begin should I use a gasket on the > > cyclinder base and head or is the Permatex Silicone gasket-maker stuff > > good enough? Willie > > Use a paper gasketat the base. Originaly there's no gasket at the head. > You could use a aluminium one, but it's not necessary. > It's better not to use any gaskets you can buy in a tube (liquid stuff). > It's perfect for the gearbox, but at the cilinder it will get too hot. > > Robbert list. >
|