| Date: | Mon, 15 May 2000 14:52:10 |
| Subject: | N2O systems |
| From: | Cap'n Tom Miller |
| Reply to author Post followup (list members only) Back to index Subscribe to the mailing list Unsubscribe from the list |
Robbert, Since writing I looked up the www.nosnitrous.com website, the
leading
supplier of kits here in the US. They indicate that motorcycle kits are
available, but I thought this section might be of interest to some of us
here.
This system is of course for a multi-cylinder 2-stroke watercraft. I
can
imagine
blowing away the guy on the 200cc machine at the stoplights when you hit
that
button. Hehe. Sorry for such a large post. This company does have
pricing
for a
motorcycle kit for 2-strokes up to 250cc that retails for US$509, but I
haven't
found the specs on their page.
Cap'n Tom
FoggerTM Systems For WaterCraft
The Adjustable, Direct Port Nitrous System
Touch the button and wave jumping takes on a whole new meaning. You can
add
pushbutton horsepower quickly and simply with NOS FoggerTM kits for
2-stroke
watercraft. And, the fully adjustable FoggerTM lets you choose how much
is
just
right. With the jets included in each watercraft kit, you can expect to
see a 30%
to 40% increase in horsepower and torque. Plus, the FoggerTM can be
adjusted for
even more (or less) power by simply changing jets if your engine is
modified.
Engineered for uncomplicated installation, each FoggerTM kit comes
complete
with
everything you need; including detailed, easy to follow instructions.
All
FoggerTM
systems include a factory filled 2-pound nitrous bottle, nitrous and
fuel
solenoids, Fogger2TM nozzles, filters, fittings, tubing,electric fuel
pump,
T-fittings or distribution blocks, jets, switches, hose, and all other
hardware
necessary for a complete installation. For an even easier and neater
installation,
we suggest that you purchase a new NOS wiring harness with your FoggerTM
system.
See page 10 for details. Please contact the NOS Technical Support
Department for
jet recommendations before you make any changes. The FoggerTM system
requires a 12
volt DC power supply with a minimum of 12 amps available. You will need
to
make
sure that you have a power supply system that can supply
12 volt DC current with at least 12 amps (or 150 watts) to the FoggerTM
System.
For further information, please contact the NOS Technical Support
Department.
| Reply to author Post followup (list members only) Back to index Subscribe to the mailing list Unsubscribe from the list |
