| Date: | Tue, 30 May 2000 17:33:41 |
| Subject: | Re: Elite Lx |
| From: | Peter Staal |
| Reply to author Post followup (list members only) Back to index Subscribe to the mailing list Unsubscribe from the list |
drill one or more 3 mm holes in the nut (flat face) and hammer it open with
a chisel try not to aim for the threat. (when the tension releases, you're
able to turn it again, no reason to use more force than needed) but no worry
you can always re-threat when the nut is off :)
peter
----- Oorspronkelijk bericht -----
Van:
Aan:
Verzonden: dinsdag 30 mei 2000 3:52
Onderwerp: Elite Lx
> i have a 88 elite LX. I have a small bend in the back rim, and have tried
to
> get the nut off, but have had trouble, and stripped it with an air
ratchet.
> I dont know how to get the rim off without ruining the bolt, witch is
> atatched to a expensive gear.
> > ~Andy
list.
>
Newsletters, Tips and Discussions on Your Favorite Topics
| Reply to author Post followup (list members only) Back to index Subscribe to the mailing list Unsubscribe from the list |
